Showing posts with label Articles. Show all posts
Showing posts with label Articles. Show all posts

Friday, August 4, 2017

Putting It All Back Together: Part 2



Yesterday marked the third month since the tornado on April 29th 2017 and devastated our homestead in Canton, Texas. Since that time, we have been working as quickly as possible to get the rabbitry back up and running at full capacity. As you may have read in 'TAP Rabbitry: The Rebuild, Phase One: New Cages' we have built many new replacement cages and were been waiting for our new metal carport to be brought and installed on the property. Once again, our friend Steven Coyne from 'Texas Rabbit Barn' and author of the 'I Grow Vegetables' blog to came over to help with the initial part of phase two, and I am sure I will need his help again once we start moving all the bunnies into their new home.

So after six weeks, two of our replacement out buildings were delivered, including the one in which we will be using for the new bunny barn/hutch. I will say this, these guys that put our metal buildings up worked at a breakneck speed. We could definitely tell they had been doing this for a while as they completely assembled two buildings in under five hours, and that is with taking time to eat lunch. Really, it was pretty impressive. If only the factory could have been this proficient in making and or cutting the parts to assemble the buildings. We have bought metal buildings from two different companies in the past, and while they are relativily inexpensive compared to wood structures, the tiem you have to wait is really frustrating. If any company could reduce the turn around time to two to three weeks or less, I think they could definitely corner the market, but I digress.



Once the new bunny barn was in place, it was time to finish stretching the fence and get the barn area fully enclosed and hopefully somewhat secure from predators. So now we have two areas on either side of the bunny barn with 6ft high chain link fence for our Black Jersy Giants, and a 6ft high chain link fence that totally encloses the rabbit barn. Thanks again Steve... Once we had finished with that, it was time for the big gun to come in and give me a little fatherly advice. You see my father served for twenty-two years in the United States Air Force (USAF) in Civil Engineering (CE) which is the maintaince arm of the USAF. There are few things that he cannot do when it comes to plumbing, electricity, painting or carpentry. He is quite the 'jack of all trades', even if we do butt heads sometimes. So I asked him to come over, hang out, and play 'straw boss' to make sure I setup and wired all of my electrical outlets correctly.



Fast forward to a week later, I finished wiring all the electrical outlets and ran all the wire up to the junction box which I had wired off the main power pole when the new home was delivered. The only thing left to do was have my work inspected and hook it up to the live wire. Fo this I once again called my favorite electrician, my father. He came out looked at my work and gave it a passing grade, so next he helped me to make sure the power was safely turned off and we hooked the bunny barn to the power grid. Amazingly, none of the breakers were tripped and there was no smoking at any of the electrical outlets and they all had power, YEAH!!!

Next, we will start on phase three, moving all of the rabbits into the new bunny barn, and setting up the automatic watering system. For this I am sure I will have to beg, or plead for help from my friend Steven Coyne from 'Texas Rabbit Barn' and author of the 'I Grow Vegetables' blog as I am sure I will need his help once we start moving all the bunnies into their new home. Actually, I have never had to beg, Steve usually calls me to ask what needs to be done on our homestead, and how can he help. We could not repay hom for all of the hard work he has done and the projects he has helped me with.


Conclusion

So there you have it, the hutch is just about ready for the rabbits to be brought in from the temporary area under the tree in the chciken pens and be placed in their new home. I purchased the additional 3ft side skirts for the bunny barn/hutch on the recommendation of another breeder that has a similar setup. I have noticed that on some days there is not as much breeze and the temperature is a couple of degrees warmer that the area just under the trees where the temporary rabbit hutch is. So we purchased a couple of barn fans to hang from the top of the beams to help circulate the warm radiating air from the metal roof. While the extended sides will definatly keep the rain out, I am not sure If I am going to like them as much as I thought. Only time will tell.

Tuesday, July 4, 2017

Putting It All Back Together: Part 1



It has been almost two months since the tornado came though on April 29th 2017 and devastated our homestead in Canton, Texas Since that time our home has been demolished and a new home has been delivered and we moved in about two weeks ago. Our two tier outdoor rabbit hutch that was set in the ground with concrete was lifted up and thrown against the back of our house totally destroying it. While we did have plans to replace it this fall, we were not ready to do so at this time, but it appears a higher power had other ideas. All the outside cages that were in the hutch, twenty in all, were a total loss. So the first thing we had to do in order to get our rabbits back on the homestead was build or purchase new cages.

The new cages will be going under a metal carport that we have ordered that is 18' x 26', but getting them to bring this to your property takes 5 – 6 weeks as they do not start cutting pieces at the factory until you order it, so we had to go with plan 'B'. My friend Steven Coyne from 'Texas Rabbit Barn' and author of the 'I Grow Vegetables' blog has played an instrumental part in helping us put our lives back together. And we finished working on building temporary hutches so that we could get the rabbits back from fellow breeder and owner of 'Bailywick Rabbitry' Bonita Hunt, who has been housing them at her expense for the last two months.



Last week we brought the first group of nine adults back to the homestead including three does that have a total of fifteen kits, for a total of twenty four rabbits. We will be finishing up the second temporary hutch today so that we can go and get the remaining seven adults rabbits from Bonita on Monday July 3rd. While the rabbits were at Bailywick Rabbitry, we donated a litter of eight kits to some 4H kids as the two cages containing the litters had their tags ripped off. We had two American Blue litters that were born one day apart, and we were unable to determine the pedigree of the litter that survived. In addition, we donated a American Blue doe to a special needs child. We also had several white New Zealand's, including a beautiful Basgil-Borden litter that was given away as we were not in a position to make any sales at that time. All of this was organized by Bonita Hunt, who as I have mentioned many times has been a saving grace for our rabbits. As for adult livestock, amazingly we only lost two adult males to the tornado, unfortunately, one was one of our original breeding American Blue males 'Clyde'.


Anyway, back to the new cages. If you have read any of my previous articles, you may note that I have been making my cages either 18x24x24 (bucks) or 18x30x30 (does), with some slightly larger grow out cages 18x30x36. This was done primarily because I based my original hutch design on the suggested cages sizes for the New Zealand and American Blue breeds so that I could have a two tier system. After three years of raising rabbits, I have decided to go with a one tier system for our cages for a couple reasons. First, it is simply easier for my wife who is vertically challenged at 4'10”, and second, because we are going to place them under a large metal carport.

So why does this matter? Well I guess in the overall scheme of things it does not, the previous sizes of cages have served me well, however now I make my cages slightly taller. As we can only get the 1x2 galvanized wire in 24, or 36-inch height, I have decided to make all of my new replacement cages a full 24” tall as opposed to my original 18”. Why? Over the years I have found that buying and cutting the 36-inch cage wire did leave me the ability to build more cages, but some would be 16-inch in height and the others 18-inch in height just due to the way you have to cut the wire. I have come to hate the waste, and if all things are equal, I believe the taller cage that allows to rabbit to stand on it's hnid legs is simply better for the rabbit. I have no scientific evidence to base this on, just my own personal observations. Now I simply purchase the 24-inch 1x2 galvanized cage wire and make all my cages 24-inches tall. The cages go together faster and why waste the wire, and now the rabbits can stand up to 2-feet if the so desire.



I could not have done this on my old hutch, it simply would not support cages taller than 16-inches on the top row or 18-inches on the bottom. In addition, I think we are going to experiment with a few of the larger 24x24x36-inch cages by placing drop down nest boxes in the bottom since we have the additional room below the cage, but we have not made any definite plans regarding this design at this time. If we do decide to try this out, I will be sure and take pictures and let you guys know how they work for us.

As for cage building, I still make most of my own cages, there used to be a guy here in my local area that made or still makes great cages, and you could buy them for about the same price you could build them yourself, and they were of great quality. The problem is, it took several weeks to a month to get your cages, and we simply do not have the time to wait. After all, he is 80+ years of age so it takes him a bit longer to do the job. Unfortunatly, I have heard that he is getting out of the cage building business due to his age and failing health, so I guess we will continue to make our own cages. While I am getting good at it after three years, I just cannot get the wire 100% flat without the tools that the 'Cage Man' has.



Conclusion

BTW, 'Miracle' is doing fine, she should be returning from my Friend Steven Coyne's rabbitry soon and will be going into the new hutch. We have the air conditioned breeding barn back on it blocks and the electricity is back on so that a few of the bucks can keep breeding throughout the hot Texas summer months. And the pregnant does and their kits will not be so stressed from the heat. As soon as we are up and breeding and ready for sales once again we will be sure to let everyone know. Once again, we appreciate all the prayers, kind words and help that have come our way during this devastating event.

Steven Coyne
Breeds: New Zealand, American Blues

Bonita Hunt
Bailywick Rabbitry (903)946-4666
Breeds: New Zealand, Lionhead




Wednesday, May 10, 2017

'Miracle', The Flying Bun...



 Many of you are not old enough to remember a small obscure television show called 'The Flying Nun', but if you do then you will understand the gist of my joke regarding the title of this article. Heck, I only remember seeing it in re-runs. Anyway, if you have seen any of our videos, or follow our Facebook page, then you know that our homestead was hit by a E3 (136 – 165mph winds), although some sources mention E4 (166 – 200mph winds) tornado on April 29th, 2017. To be honest the devastation on our county road was unbelievable, but no one nearby was killed although some sustained minor injuries.

Yesterday, May 9, 2017, I was out on the property letting the chickens out of their coops and feeding the for the morning, As I was heading for the small storage shed where the feed was kept, much to my surprise and astonishment I saw a rabbit on our roof! Yes, I said there was an American Blue doe walking around on the roof of our house. How she got there I can only surmise by looking at the only route to the roof and that is by the large tree that is sitting in our kitchen. You see a large tree, of which has a diameter larger than I can wrap my arms around fell through our kitchen and four other rooms of our home making it impossible to access part of the kitchen and the pantry (mud room).



The rabbit hutch was lifted out of the ground and thrown up against the back porch in that specific area and there was a lot of debris everywhere and all of the cages were mangled, many beyond repair. We found a three empty cages in the yard, two on the back porch and one in the front yard, but we only recovered two loose rabbits. We assumed that the missing American Blue doe (who was unnamed) was lost. I believe that this American Blue doe had been hiding in the pantry area for more than a week, as she definitely was not on the roof when we removed the branches and top of the tree that had fallen through the house to cover the roof with tarps. She eventually decided to go 'walkabout', using the tree as a ram and climbed up onto the roof where I found her yesterday.

In a near panic, as only a rabbit person could do, I found a ladder and set it against the roof of the house and tentatively climbed slowly with a bowl of food. Surprisingly she came over to me easily and I was able to grab her where she ate. Not knowing how she would react, the next issue I encountered was how to safely carry her down the ladder without falling myself. Cell phone to the rescue as I slowly reached into my pocket with one hand removed my phone and called my wife to come down from my mother-in-laws house to hand me a small dog kennel to put her in so that we both could safely descend the ladder.



Conclusion

She appears to be doing well, and she finally received her name. My wife said ti was a miracle the she survived. Calling her survival a “miracle” may be a little over the top, but so be it, that will be her new name from this day forward. She seems to be doing fine at this time and when my wife was feeding and watering her, she came to the front of the cage to be loved on. Only time will tell if 'Miracle' continues to flourish and recover from her ordeal, but rabbits are pretty resilient, and our hope is to add her to our line breeding program of American Blues which is why she was originally kept from our last litter. We will keep y'all informed of her progress.

At this time TAP Rabbitry is in recovery/rebuild mode. All of our rabbits are being cared for (at her expense) by a wonderful woman of God and fellow breeder Bonita Hunt (Baileywick Rabbitry 903-946-4666) until we get the new outside hutch up and running. Not only is Bonita housing and feeding our rabbits, she has reached out to the rabbit raising community. Many have donated new cages, feeders, and all the other necessary equipment to get us back on our feet. In addition, I suspect she has spent more money of her own than she is willing to tell us. Thanks again Bonita for all that you have done. As always, if you have enjoyed this article or have found it informative, then please share it with your friends. Don't forget to send us a friend request on Facebook or Google+ so that you will not miss any of our latest articles.

So if you need rabbits at this time I can recommend two friends of mine, Steven Coyne (Texas Bunny Barn) and Bonita Hunt (Baileywick Rabbitry) you will find contact information for these great folks below. Thanks again.

Steven Coyne (Texas Rabbit Barn)
texasbunnybarn@yahoo.com
(972)742-4922
Forney, Texas
Breeds: New Zealand, American Blues

Bonita Hunt (Baileywick Rabbitry)
bhunt1961@yahoo.com
(903)946-4666
Honey Grove, Texas
Breeds: New Zealands, Meat Pens, Dwarf Hotots, Californians, Mini Lops, Dutch, Lionhead lops, Lionheads, Mini Satins, Jersey Woolies, Netherland Dwarfs, Polish, and Holland Lops.

Friday, September 2, 2016

Ear Mites


 
One morning while doing your rabbit chores, you notice that your rabbit is shaking it's head, or scratching it's years. Upon closer examination of the rabbits ears you may notice small blisters and small areas of yellow crusting scabs in the lower portion of the ears known as 'ear mange' or 'ear canker'. At this point there is only culprit responsible for this condition, the common ear mite. Ear mites are a member of the Psoroptes or Chorioptes family. They are a blood sucking parasite that burrow into the flesh of the rabbits ears and lay their eggs in small tunnels as they suck blood from the skin. When your rabbit feels the mites biting it's ears it begins shaking it's head and scratching at it's ears which can cause more damage to the ears.

The good news is that by themselves ear mites are not deadly, however, untreated they can cause significant damage and discomfort to your rabbit and they can easily be spread from one rabbit to another unknowingly by you the breeder. In worse case scenarios, the infestation can cause the rabbit's immune system to weaken making it more susceptible to other bacterial infections. If the inner or middle ear becomes infected the rabbit(s) infected may develop wry neck (torticollis) which usually results in the death of the rabbit.

So how did your rabbits get infected with ear mites? There are many vectors that could be responsible. Mites can be transported by a number of rodents including mice and rats, as well as your barn cat if you have one. They can live in straw and or the cracks of wooden hutches for a long time and continue to re-infest your herd. They can be transmitted by the breeder by unknowingly rubbing or scratching the head and ears of a rabbit that has mites and then handling another rabbit without washing their hands in between. Your rabbit can even acquire them from any activity in which there are a large amount of rabbits present such as a rabbit show, after all it only takes one newly infected bunny to spread the mites to many others. However, the most common way mites gain access to your rabbitry is when you bring a newly infected rabbit into your rabbitry that has mites, but does not yet show any signs or symptoms of the infestation. This is what happened in our case. Fortunately, we soon discovered the problem and because the rabbit was isolated, we were able to eradicate the mites without any problem, and the rabbit involved is doing fine.

Now there are many different ways to treat ear mites. The most common non-medication treatment option is the use of mineral or olive oil (way to expensive, keep it in your kitchen) to coat the scabs and drown the mites. There are also a few different “off-label” medications that can be used to effectively kill the mites as well as their eggs. Each technique has it's advantages and disadvantages whether it be cost, length of treatment time, or possible side effects. The goal of this article is to share with you the many alternatives that you may choose to eradicate the mites from your herd should you find that you have a rabbit with ear mites.




Non-Medical Treatment

The most common non-medication type treatment for ear mites is called the 'triple 3' or 3-3-3 treatment. This treatment involves coating all the scabs on the ear with mineral oil once a day for 3 days to drown or smother the mites. The easiest way to do this is to use a small medicine dropper to place 3 or 5 drops of oil in ear year and then gently massage the ear. If there are a significant amount of scabbing noted, then dip a q-tip in the oil and gently coat the scabbed areas and carefully remove as many of the scabs as possible without causing further injury to the rabbit.

Then apply the mineral oil every other day for three applications. By this point the ears should be looking much cleaner. After three applications, continue to apply oil to the ears once a week for a total of three more weeks. Hence the name 'triple 3' or 3-3-3. This technique not only kills any active mites that may be infesting the rabbits ears, it will also kill any mites that may hatch from eggs that were still in the ear.

This process works by actually drowning the live mites with mineral oil causing them to die, the reason you have to perform so many applications of the mineral oil is that the initial application does not destroy any eggs that may be in the tunnels of the skin in which they are laid. These eggs incubate for a total of four days then new mites are hatched. So while one dose of mineral oil may kill the adult mites, four days later any eggs left in the ear will hatch and the process will continue unabated. Therefore to be effective you most perform multiple applications of mineral oil as directed.

Mineral Oil
Strength: Do not dilute
Dose: 3 to 5 drops (Enough to coat the scabs on the initial treatment)
Cost: $2.00 for 16 ounce bottle (more doses then I want to count)
Availability: Can be purchased at any drug store or supermarket.

The advantages of this form of treatment is that it is extremely cheap and relatively easy to perform. The disadvantages are that it is labor intensive, and the process takes the longest time to eradicate the mites, and you may have to perform the compete process more than once for severe infestations. If you have a lot of animals it will take you along time to treat them all.


Medical Treatment Options

There are several fifferent medications that can be used to treat ear mites in rabbits, with the exception of 'Eradimite' all of them are considered 'off-label'. That is that the medication or treatment option is effective for treating ear mites in rabbits, but that is not what the original intended use of the medication was created for. Other than Eradimite, the two most common forms of medical treatment used to treat ear mites in rabbits is the use of the anti-parasitics ivermectin and selamectin.


Eradimite


Is a topical ear solution that uses pyrethrins (0.15%) and piperonyl butoxide (1.50%) as it's active ingredients to kill the mites in dogs, cats, and rabbits. Pyrethrins come from the chrysanthemum flower and have been used in many insecticides since the 1950's, piperonyl butoxide is a chemical that keeps the insects from being able to degrade the posion therby enhancing the effectiveness of pyrethrins. The remaining ingredients (98.3%) is essentially aloe vera. Pyrtethrins are a form of nerve agent which excites the nervous system of any insect that eats or touches it. This quickly leads to their paralysis and eventually kills them. My research into this product indicates that it does nothing to destroy the mites eggs, therefore it has to be repeated several times in order to kill all of the mites in your rabbits ears.

The recommended dosage is to place 8 – 10 drops of the mediation in each ear, which means that a 1 oz bottle will probably only be good for two to four applications before you need to purchase another bottle. The instructions for use state “Repeat every 2 days until the condition has cleared up or as directed by your veterinarian.” As far as I can tell, eradimate will kill mites in their various stages of growth, but it does not effect the eggs which is why multiple applications are needed.

I have read on may forums that pet owners claim that 8 to 10 drops are way to many for their dog, cat, and or rabbit and they usually recommend only 3 to 4 drops. As I have never used this medication, and do not know of anyone who has done so, I cannot verify if the lesser dose is effective or not. There appears to be no specific 'weight based' instructions for this medication, the only caveat is that it is not to be used on dogs, cats, and rabbits less than 12 weeks old.

Eradimite (Fort Dodge)
Strength: Do not dilute
Dose: 8 to 10 drops per ear
Cost: $17 – $20 for a 1 ounce bottle (about two to four applications)
Availability: Can be purchased on-line or at some pet stores.


Ivermectin 1% (Anti-parasitic)


Some would say that the use of anti-parasitic agents is the easy way out, however it does require the purchase of medication as well as syringes, and you need to know the proper way to administer the medication to your rabbit. The medication of choice is Ivermectin (Stromectol). Ivermectin is a broad-spectrum anti-parasitic used to treat head lice, scabies, and ear mites among other things in both humans and animals. The effective dosage of ivermectin for rabbits is 0.018 to 0.025 ml of a premixed 1% sterile solution for each pound that the affected rabbit weighs. While a smaller dose may be effective, for rabbits with a severe mite infestation, it is recommended that the dose used be 0.025 ml's for each pound your rabbit weighs. Some of the brand names for ivermectin that you will find not only on the internet, but at retail farm supply stores such as Tractor Supply include: Ivomec 1%, Vetrimec 1%, and Agri-Mectin among others.

Name: Ivermectin 1% Injectable
Strength: 10mg/ml
Dose: 0.018 – 0.025 ml per pound of rabbit
Cost: $25 – $35 for 50ml bottle (about 400 – 450 doses)
Availability: Can be purchased on-line, or locally at Tractor Supply, or at almost any farm and ranch supply store.

Of the three medical treatment options, this is the cheapest as a 50ml bottle of ivermectin will supply you with enough medication for about 400 – 450 doses for a 10lb rabbit making the cost around $0.065 per application. The advantage of this treatment is that it 99.6% effective after the administration of three doses. In addition to killing ear mites, it also eradicates any fur mites the animal may have. The disadvantages is that you need to also purchase insulin syringes (which are relatively cheap) and you need to know how to give a subcutaneous injection to your animal as you will need to administer this treatment once every two weeks for a total of six weeks.


 
Breeders Note: Using insulin syringes to administer ivermectin is just about the only accurate way to administer the correct dosage of medication to your rabbit. Insulin syringes are broken down into a scale known as units. There are 100 units in 1 ml (millileter). I have taken the original recommended doses from the chart in the book 'The Rabbit Problem Solver' and added a column to the chart indicating the number of units of medication you should administer to your rabbit based on the rabbits weight. If you want to perform your own calculations simply take the dose in ml's and multiply by 100 (0.25ml x 100 = 25 units), it that simple.



Ivermectin should be administered subcutaneously once every two weeks for 6 weeks (total of 3 doses). To administer a subcutaneous injection, pinch up the skin over the shoulder blades of the rabbit and clean the area with a q-tip dipped in alcohol, or with a cotton ball soaked in alcohol. Then inject the required amount of medication into the tented area of the skin that you have just cleaned. Keep in mind that ivermectin is a thick and viscous medication and it takes a while to fill the syringe, and it will take a bit of pressure to inject it into to nape of your rabbits neck. Having a partner to hold the rabbit you wish to medicate is definitely an added bonus.

Breeders Note: There are a couple of other forms of ivermection such as pour-on, pastes, and even powders, none of which I have used. While there are a number of videos on YouTube from people who have given their rabbits ivermectin 1.87% horse de-wormer orally to treat ear mites, I cannot validate the effectiveness of the dose which is often described as "pea sized." I may delve into these other types of ivermectin in a future article, but for know, know that the subcutaneous route is safe and effective when administered correctly.


Revolution (Selamectin 15mg topically)

Revolution for dogs and cats can be used as an 'off-label' medication to treat ear mites in rabbits. According the article 'Efficacy and safety of Selamectin (Stronghold / Revolution) used Off-Label in Exotic Pets' in The Journal of Applied Research in Veterinary Medicine (JARVM), Stronghold and Revolution for puppies and kittens (5lbs and under) can be used as an effective treatment for ear mites in rabbits.

In two independent clinical trials a 15mg application of selamectin killed all of the mites in rabbits whose ears were infested. In the first study, when applied to the skin at the base of the neck either once or twice after a single application of 15mg of selamectin (1 tube) no live mites were recovered from day 7 through day 56. In the second case study four 4-month-old dwarf rabbits who shared a cage all with ear mites were treated with 15mg of selamectin, no mites were detected after 7 days.

Revolution (Mauve Colored Box)

Name: Revolution for Puppies and Kittens < 5lbs (Mauve Colored Box)
Strength: 15mg per tube, 3 tubes per box.
Dose: 1 15mg application (3 doses per box)
Cost: $25 – $30 (about $10.00 per application)
Availability: Can be purchased on-line, or locally from Pet supply stores such as Petsmart, Petco, or from your local veterinarian. 



Of the three medical treatment options, this is the most expensive as one box contains only 3 does (15mg per tube) of the selamectin making the cost about $10.00 per application. The advantage of this treatment is that it is 99.5% effective after the administration of one to two doses. It is easy to administer and takes no medical knowledge to do so. The major disadvantage is the cost. If you are only treating one or two animals this may be the route you want to go, but it is far to costly to try and treat more than a few animals.


Prevention

The old adage, “prevention is always the best medicine” still applies to ear mites. When bringing any new livestock into your rabbitry, the best practise is to isolate them from the rest of your herd for a minimum of two weeks, but four weeks is better. This will allow you to determine not only if the animal has any ear mites that may have been undetected by both the breeder and yourself when you initially examined the rabbit. Keep in mind that no breeder that I have ever known intentionally sold a rabbit infested with mites, but it does happen. After you have treated your rabbits and they are mite free, you will need to remove them from the cages and clean and disinfect your cages and any plastic resting boards.

The following instructions will demonstrate how we clean our cages here at TAP rabbitry. We clean and disinfect our cages about every 6 months and whenever necessary. We clean and disinfect our cages with both heat and bleach. I use a butane torch and burn off any old hair from the wire cage. Then I spray the cages with simple green and remove any additional stuck on stuff with a plastic bristle brush. The cages are then rinsed with the water hose and I spray the entire cage with a 1:10 bleach solution (1 part bleach, 10 parts water) and place the cages in the sun to dry.

Make sure you also clean and disinfect any plastic resting boards that may have been in cages with infected animals. For this, I clean them with simple green, and soak them in a container filled with a 1:10 bleach solution. Any wooden, sheet rock or other porous type resting boards that cannot be disinfected with bleach should be thrown away and not reused as the mites can live in the cracks and crevasses of these items.


Conclusion

If you have the time, and you are only treating a couple of rabbits, then the non-medical treatment may be the choice for you. Of all the treatment options it takes the most time and if you have a rabbitry of any size it will take you some time to treat all your livestock. It will work, but it has the lowest success rate, (most often due to human error) and may need to be performed more than once. It is however the cheapest option, and the only non-medical option that I am aware of for treating ear mites. I am not so sure that the use of eradimite is any more effective than simply using mineral oil as eradimite does not kill the eggs and you still have to perform multiple applications just as you would if you were using mineral oil. If these were my only two choices, I would definitely try mineral oil first before ponying up the money for eradimite, but this is just my humble opinion. If you are not wanting to medicate your rabbits then the use of mineral oil is definitely the only avenue you have other than destroying the animal and or animals concerned.

If you do not mind the use of anti-parasitics then Ivermectin is a good choice, especially if you have to treat multiple animals. It is an inexpensive solution when you figure the number of doses you can get from one 50ml bottle, and with a 99.6% success rate it is hard to beat. The downside is that you will have to wait for a minimum of two months before you can butcher any treated animals for human consumption to give the medication time to get out of their system. Revolution (for dogs and cats) has about the same success rate as Ivermectin, it is easier to administer, but is far more costly per dose, but if you only need to treat a few rabbits, it is the easiest of the three to administer. Like Ivermectin, a two month waiting period is recommended to allow all of the medication to thoroughly leave the rabbits system before butchering them for human consumption.

It should be noted that I am not a veterinarian, and I do not endorse any of the products that are in this article regardless of whether I have used them or not. Proper care should be taken whenever administrating any medications to your rabbits and you do so at your own risk. I have done my best to provide you with the necessary information so that you can make an informed decision regarding how you may wish to treat your rabbits if and when they become infected with ear mites. I encourage you to do any additional research that you think may be necessary regarding the side effects of he aforementioned medications. As always, if you have enjoyed this article or have found it informative, then please share it with your friends. Don't forget to send us a friend request on Facebook or Google+ so that you will not miss any of our latest articles.


Resources:

Bennett, Bob, Storey's Guide To Raising Rabbits, (North Adams, MA: Storey Publishing, 2009).

Fisher, Maggie DVM, Beck, Wieland DVM, Hutchinson, Melanie J. DVM, “Efficacy and safety of Selamectin (Stronghold / Revolution) used Off-Label in Exotic Pets” in The Journal of Applied Research in Veterinary Medicine (JARVM), 2007 (pp 87-96)
Patry, Karen, The Rabbit Raising Problem Solver, (North Adams, MA: Storey Publishing, 2014).



Thursday, August 25, 2016

Linebreeding Meat Rabbits For Food and Profit



Line-breeding is a form on inbreeding that is most often used by successful rabbitry's in order to maintain the desired genetic traits and characteristics of their foundation stock. Instead of mating brother and sister (inbreeding), linebreeding is the breeding of father to daughter and mother to son to maintain and improve the herd. The process of selectively breeding offspring to their respective parent has been performed for hundreds of years with cattle, goat, pigs, sheep, poultry, and rabbits by both farmers and ranchers. The goal is to produce enough offspring in your rabbitry that you can put meat in the freezer and sell quality livestock while maintaining a quality genetically stable bloodline.

So what does a genetically stable bloodline look like? Well with linebreeding the goal is to be able (after several generations) to produce a specific generation that still has 50% of each of the genome of the original parents used as your foundation stock. Sounds almost impossible right? Actually, it is pretty easy if you keep accurate records and are careful with your breeding program.

To be successful, your breeding must be kept on strict lines and within limits, and may be adopted for years without having to outcross any new rabbits into your bloodlines. To aid you in your endeavor, you will not only need to have a linebreeding chart, you will also need to know how to read it, and that is the goal of this article. The process will become clear once you understand how to use the linebreeding chart accompanying this article.


The Linebreeding Chart

To begin the process we need an unrelated breeding pair of rabbits (male and female), this pair will be known as your foundation stock or original male and female. They are represented at the top of the chart simply as 'Female' on the left and 'Male' on the right. Each dotted line represents a female (doe) and every solid line a male (buck). Where the two lines meet there is a circle with a letter depicted indicating what group the offspring of this breeding pair belong too. In addition, there is a fraction indicating the amount of genetic material (genes) that each parent has contributed to each offspring.


Getting Started

Once we have chosen a breeding pair to become our foundation stock, we begin the breeding process. All of the kits from this breeding will be labeled group A. Looking at the chart we see that all of the kits born in this litter will receive one-half (½ or 50%) of their genes from the original male, and one-half (½ or 50%) of their genes from the original female of this line.

Once the rabbits from group A reach breeding age (about 6 months), we will breed back one of the males from this group to our original female (mother to son), and one of the females from this group to our original male (father to daughter). These two breedings produce the rabbits in groups B and C, each of which possess three-fourths (¾ or 75%) of the genes of the parent and one-quarter (¼ or 25%) of the genes of the other parent. In this case, Group B carries three-fourths (¾ or 75%) of the genes from our original female, one one-quarter (¼ or 25%) of the genes from our original male, while group C carries three-fourths (¾ or 75%) of the genes from our original male and one-fourth (¼ or 25%) of the genes from our original female.

So, how did we arrive at these figures? Let's examine the kits produced in group C by the breeding our original male with a female from group A. Our original male carries 100% of his own genes and the female from group A carries one-half (½ or 50%) of our original male genes. Adding these two fractions together we get 1 ½. We then take 1 ½ and divide it by 2 (because the breeding takes two rabbits) and the result is that all the kits produced by this breeding (which will be labeled group C) will carry three-quarters (¾ or 75%) of the genes from our original male, and one-quarter (¼ or 25%) of the genes from our original female (1 + ½ = 1½ / 2 = ¾ male genes). This same principle is carried through out the chart with the number by the circle indicating the fraction or percentage of the genetic material that each parent has provided (left side of chart female, right side of chart male).

For the third generation we breed a male from group C to a female from group B. Each of which contains three-quarters (¾ or 75%) of the genes of the male and or female respectively. All of the kits from this breeding, labeled group E, will contain one-half (½ or 50%) of the genes from both our original male and female.

This is determined by adding three-quarters (¾, or 75%) of the females genes from from group B to the one-quarter (¼ or 25%) of the genes from the female from group C and divide by 2 (¾ + ¼ / 2 = ½ or 50%). Likewise we add three-quarters (¾ or 75%) the male genes from group C to one-quarter (¼ or 25%) of the males genes from group B and divide by 2 ( ¾ + ¼ / 2 = ½ or 50%). This is the objective of linebreeding, namely to come back to a point in which the rabbits in your herd contain one-half (50%) of the genetic material of both your original male and female foundation stock. As long as we do this we are not inbreeding, rather we are linebreeding. Therefore, each time we breed without going outside the bloodline, we are maintaining the genetic base of our original male and female rabbits.

Next, we breed a male from group B with our original female resulting in group D, whose kits posses seven-eights (7/8 or 87.5%) of the original females genes and one-eighth (1/8 or 12.5%) of our original males genes. We also breed a female from group C, to our original male, resulting in group F, whose kits possess seven-eights (7/8 or 87.5%) of the original males genes and one-eighth (1/8 or 12.5%) of the original female's genes. We will also breed a male from group F to a female from group D, resulting in group I, and again we come back to our genetic goal as all of the kits from this breeding contain 50% of the genes from both our original male and female.

The next generation will produce kits having one-half (½ or 50%) of their genes coming from our original male and female at group N by mating a male from group J and a female from group H. Offspring from groups G and K if bred together will also return us to our goal of producing kits that contain one-half (½ or 50%) of the genes of each of our original male and female foundation stock.

Following this form of linebreeding enables the breeder to keep several different males and females breeding that are genetically similar enough to retain and improve on their original breeding pair without causing any genetic anomalies or health issues.


The percentage of genes contributed from our original male and female for each group are listed below in what I consider is a little more concise and readable format.

1st Generation (Group A)
Group A's Genetic Makeup: 50% original female, 50% original male.
  • Breed a male from this group, to your original female to get group B, and breed a female from this group to your original male to get group C.

2nd Generation (Groups B and C)
Group B's Genetic Makeup: 75% original female, 25% original male.
  • Breed a male from this group to your original female to get group D, and breed a female from this group to a male from group C to get group E. Breed a female from this group to a male from group D to get group G.
Group C's Genetic Makeup: 25% original female, 75% original male.
  • Breed a male from this group with a female from group B to get group E. Breed a female from this group to your original male to get group F. Breed a female from this group with a male from group F to get group K.

3rd Generation (Groups D, E, and F)
Group D's Genetic Makeup: 87.5% original female, 12.5% original male.
  • Breed a female from this group to a male from group E to get group H. Breed a female from this group to a male from group F to get group I. Breed a male from this group to a female from group B to get group G.
Group E's Genetic Makeup: 50% original female, 50% original male.
  • Breed a male from this group to a female from group D to get group H. Breed a female from this group to a male from group F to get group J.
Group F's Genetic Makeup: 12.5% original female, 87.5% original male.
  • Breed a male from this group to a female from group D to get group I. Breed a male from this group to a female from group E to group J. Breed a male from this group to a female from group C to get group K.

4th Generation (Groups G, H, I, J, and K)
Group G's Genetic Makeup: 81.25% original female, 18.75% original male.
  • Breed a male from this group to a female from group I to get group L. Breed a female from this group to a male from group J to get group M.
Group H's Genetic Makeup: 68.75% original female, 31.25% original male.
  • Breed a female from this group to a male from group J to get group N. Breed a female from this group to a male from group K to get group O.
Group I's Genetic Makeup: 50% original female, 50% original male.
  • Breed a female from this group to a male from group G to get group L. Breed a female from group to a male from group K to get group P.
Group J's Genetic Makeup: 31.25% original female, 68.75% original male.
  • Breed a male from this group to a female from group G to get group M. Breed a male from this group to a female from group H to get group N.
Group K's Genetic Makeup: 18.75% original female, 81.25% original male.
  • Breed a male from this group to a female from group H and you get group O. Breed a male from this group to a female from group I to get group P.

5th Generation (Groups L, M, N, O, and P)
Group L's Genetic Makeup: 65.63% original female, 34.37% original male.
Group M's Genetic Makeup: 56.25% original female, 43.75% original male.
Group N's Genetic Makeup: 50% original female, 50% original male.
Group O's Genetic Makeup: 43.75% original female, 56.25% original male.
Group P's Genetic Makeup: 34.37% original female, 65.63% original male.


Conclusion

There are several prominent breeders of meat rabbits throughout the United States that have been successfully linebreeding for years. One of the more successful pseudo-commercial type organic rabbit meat breeders is Polyface Farms owned by the Salatin family who have a pretty substantial herd of rabbits. They have been linebreeding meat rabbits for more than 25 years with great success. So much so that they have developed their own strain or bloodline of meat rabbits. Through the process of linebreeding you can develop those traits you are looking for in a specific breed of animal and continue to enhance those characteristics to their full potential. This has been proven time and again by breeders of cattle, sheep, goats, and pigs through specific lines of livestock that have been successfully breed for 50, to 100 years and more without any new genetic material being added to the herd.

Now most of us will never be breeding meat rabbits for that long, but it will probably take you 1 to 2 years for each generation to work your way through Fetch's chart that is listed in this article. That's 5 years in the most optimistic view, but more likely it will take you 7 to 10 years to produce a good quality herd while maintaining it's genetic diversity. I say this because of the following reasons. First, in my personal opinion you shouldn't start breeding your doe until she is 6 months old. Second, once your doe is ready to breed, you may have to cull a few litters before you get the best male and female from each group in order to breed for the next generation. Hey, but that's ok, placing rabbits in the freezer is the main reason most of us are raising meat rabbits. Finally, you have to consider that the climate in which you live and the type of housing you use for your rabbitry has a big impact on your breeding schedule. If you live in the south, you will generally be unable to breed between in the months of May, June, July, August, and most of September if you do not keep your bucks in an air conditioned barn. In East Texas were we live, that only leaves you with 6 to 7 months out of the year in which to breed before the temperature starts to get above 80 degrees.

So, by the time you get to the 3rd generation you may have five breeding pairs with some males and females breeding to more than one generation all producing meat for your freezer and livestock for you to sell as you look for that next best rabbit(s) to continue your bloodline. Who knows, with proper herd management, maybe one day you can be successfully breeding your own bloodline for more than 20 years just as the Salatin's on Polyface Farm. As always, if you have enjoyed reading this article and find the information here valuable, we ask that you share it with your friends. Do not forget to send us a friend request on Facebook or add us to your circle on Google+


Similar Articles On Our Blog:

 
New Zealand Rabbit Genetics Part 1: Dominant And Recessive Genes
New Zealand Rabbit Genetics Part 2: Coat Color, It's In The Genes



References:




Bennet, Bob, Storey's Guide To Raising Rabbits, North Adams, MA: Storey Publishing, 2009

Patry, Karen, The Rabbit Raising Problem Solver, North Adams, MA: Storey Publishing, 2014

Sunday, August 21, 2016

Breeding For Success



 Up to this point I have written four articles about meat rabbit genetics and how to breed for color and specific color patterns (solids, charlies, and brokens), but I have never really tackled the specific subject of establishing a successful breeding program. Because selecting a specific breeding program and maintaining your herds health as well as genetic diversity is so important, I decided to write this article for those of you who are just getting started raising meat rabbits.

Whether you are breeding meat rabbits just to supply your family with a healthy nutritious source of meat, and/or you want to be able to sell extra livestock to off set your food costs; how you setup your breeding program after you have purchased your first rabbits will have a significant impact on your rabbitry's performance. The topics I am going to discuss in this article are: inbreeding, linebreeding, outcrossing (outsourcing) and crossbreeding. Before we get started, let's look at a few important terms.

Inbreeding – Inbreeding is the process of breeding closely related rabbits such as brother to sister. With this type of breeding program all the rabbits in your herd are closely related.

Linebreeding – Linebreeding is a specific form of inbreeding in which all of the rabbits in the herd are related to a specific ancestor or ancestors to maintain a specific trait. The genetic relationship of the rabbits in linebreeding is generally further apart than with straight inbreeding.

Outcrossing – Outcrossing or outsourcing is the method of breeding your livestock with that of another genetic line of the same breed. No matter how successful you are, eventually every breeder will look to add some new blood into their herd.

Crossbreeding – Crossbreeding is the method of breeding in which two different breeds of the same type of animal are bred to produce an offspring with traits from both breeds.


Inbreeding

If your are raising meat rabbits for the sole purpose of meat, then in theory you could follow a program of straight inbreeding. Rabbits raised using this process will be closely related and will have offspring that are not as genetically diverse. Because of this, inbreeding accentuates both good and bad existing characteristics and or traits. If you are not vigilant and do not cull your herd properly (removing rabbits with poor traits), you will soon find that you will begin to have substantial problems as the less desirable traits begin to increase exponentially in your herd.

Problems that arise with an inbreeding program include: malformed teeth, deformities, smaller litters, higher mortality, and less disease resistance. Keep in mind that if you later decide that you want to sell meat rabbits, then you need to adopt a program of linebreeding as opposed to straight inbreeding as no one will want to purchase your rabbits if they do not meet the standards of the breed due to abnormalities, or if the appear sickly.


Linebreeding

Line breeding is the selective process of breeding related animals, that have specific traits that you desire to have in your future off-spring. The goal of linebreeding, is to keep the amount that any one animal contributes to the DNA of it's offspring at or below 50%. Therefore, line breeding can be an effective way to improve the individual traits of the rabbits in your herd. The genetic relationship of the rabbits in linebreeding is generally further apart than with straight inbreeding. A good linebreeding program involves the use of relatives such as grandmother to grandson, grandfather to grandaughter, uncles to niece, mother to son, father to daughter etc… With linebreeding as opposed to straight inbreeding there is a little more genetic variation in your herd.



This is the type of breeding program that is followed by most successful rabbit breeders, whether they are breeding for meat or for show. While it is technically a form of inbreeding, by following a specific line breeding chart, you can maintain a wider genetic makeup in your herd without having to worry about the problems associated with straight inbreeding.


Outcrossing or Outsourceing (Bringing In New Stock)

No matter how successful you are, eventually every breeder will look to add some new blood into their herd. Outcrossing or outsourcing is the process in which you do this. Whether you are looking to improve a specific trait such as fuller hindquarters, or a more luxurious coat, or you simply believe your herd is becoming too inbred and losing vitality, then outcrossing may just be the way to go.

There are two specific was to outcross your rabbits. The first, and the one that most people will end up doing is simply purchasing a new buck for their herd. The second option is to take one of your does to another breeder to be mated with one of their bucks. Of the two, the first option injects the most new genetic material in your herd and has the most impact. By purchasing a new buck, as opposed to a doe, you can use him to mate with all the females in your herd adding his genetic makeup to your herd.

When outcrossing, only choose rabbits with the specific traits that you are looking for. If you are outsourcing using option one and are purchasing a new rabbit, then it is my advice to purchase a new buck that is pedigreed. A pedigree does not guarantee you that 'all' of the offspring that this rabbit will produce will have the specific traits and features you are looking for, rather it gives you a genetic road map of the potential of the animal. Remember, it is not necessary that the rabbits that you purchase come with a pedigree, rather they should come from a long line of rabbits that carry those same specific traits you desire. Personally, I would rather purchase a quality looking rabbit without a pedigree, then purchase a less looking desirable rabbit that has a pedigree. Yes, I have done this, and over time (generally three to four generations) you can develop your own specific pedigree.

If you have a friend or family member that is a fellow breeder, or you know of another breeder in your area that produces quality rabbits that has a genetically different line of rabbits, then option two may be a viable choice. This option is less desirable (because it has a lesser genetic impact on your herd), but it is also the cheapest (does not require the purchase of an animal). A variation of this theme is to trade or barter one of your good quality offspring for that of another breeders offspring. My friend Steve Coyne (owner of Texas Bunny Barn) and I often trade livestock, and or outcross our does. This has worked out well for both of us. While I originally purchased all my 'John Gillis' line of livestock from Steve, I have since added some Basgil/Borden bucks and does to our herd as well as a few from breeder Bonita Hunt (who raises meat rabbits of show quality, and wins a lot!) so we have different genetic lines.


The Good and Bad Of Outcrossing

If you have read any of my articles on rabbit genetics on our blog, then you know that all rabbits will carry some recessive genes (genes that carry traits not visible to the eye). Therefore, any new rabbit that is brought into your herd will carry some of these recessive genes that will be passed along to their offspring. So if the first generation of outcrossed offspring is not exactly what you hoped for, keep the offspring that have the traits you desire and cull the rest to the freezer. Then take those offspring that you saved and breed them back into your line. This technique will maximize the good traits that you desire, while eliminating the transmission of less desirable traits into your herd. By continuing to follow this process, you should then start to have good results rather quickly, and you can keep your freezer full of meat, which is my opinion is always a bonus.


Crossbreeding

Many of the rabbit breeds we have today are the result of crossbreeding two or more rabbits to create a unique breed. As mentioned, the process was historically performed by breeding two different breeds with the breeder keeping those offspring with the desired traits and culling the less desired offspring. Through the process of inbreeding they continued to refine those characteristics for multiple generations. Then changing to linebreeding they continued to selectively breed until they had a genetically different rabbit.

For the home meat breeder, crossbreeding usually means the breeding of two different breeds specifically for meat to put in the freezer. While we do raise two different breeds of meat rabbits here at TAP rabbitry (American Blues, and New Zealands). We currently do not crossbreed. My friend Steve Coyne of Texas Bunny Barn, raises the same breeds and has bred crosses many times for meat. I must say that the crosses of New Zealand and American Blue's that Steve has bred appear to be somewhat larger than the New Zealands themselves and this may be an avenue that we one day approach just to put meat in the freezer.

If you are wanting to sell meat rabbits to supplement your income, be careful of crossing breeds. If you are a sloppy record keeper, and do not keep your crosses separated you could soon find that your herd of pure bred rabbits all end up as hybrids. Now hybrids fine if you are just producing meat, but not a good thing if your are telling your customers that your rabbits are pure bred when they are not. Selling someone a rabbit you claim is a pure breed when it is not is not only a poor business practise, but it has a direct impact on both the reputation of the breed as well as your rabbitry.


Conclusion

In animal management whether you are raising cattle, sheep, goats, chickens or rabbits linebreeding is the most common method for procreating and expanding your herd. If you want to ensure long-term breeding success in your rabbitry, then linebreeding is your best bet. By consistently mating rabbits of similar backgrounds, you can keep the rabbits with good traits and cull the rabbits with bad ones to the freezer. This process will allow you to consistently produce good, healthy animals without having too many surprises in your litters, as well as keeping your freezer stocked with delicious and nutritious meat.

When the time comes that you need to outcross by purchasing new livestock for your herd, my recommendation is to purchase a good quality buck as it will have the greatest genetic impact on your herd. If you can outcross with a friend or fellow breeder for free that is even better. However, given the choice to outcross for free to an inferior rabbit versus purchasing a good quality buck should be avoided. No sense adding genetic crap to your herd just because it is free. Free crap is still...well crap. In my next article I will explain how to use Flech's linebreeding chart to help you implement a successful linebreeding program into your rabbitry. 

I hope this article has shed some light on some of the questions regarding breeding of rabbits for meat production. Yes, these same principles apply to all rabbit breeds whether you are breeding for meat or show. As always, if you find any information in this article useful, please share it with your friends. Don't forget to send us a friend request on Facebook or Google+.


References:




Bennet, Bob, Storey's Guide To Raising Rabbits, North Adams, MA: Storey Publishing, 2009

Patry, Karen, The Rabbit Raising Problem Solver, North Adams, MA: Storey Publishing, 2014


Fellow Breeders Mentioned In This Article:

Steve Coyne (Texas Bunny Barn) Terrel, Texas (972) 742-4922
Meat Breeds: New Zealand (Red and White), American Blues
Lines: John Gillis

Bonita Hunt (Baileywick Rabbitry) Dial, Texas (903) 946-4666
Meat Breeds: New Zealand (Red, White, Blue, and Black)
Lines: Basgil/Borden, Robatham's